( click here )

Recommended Items for Grains:
Point Level Continuous Level Solids Flow
> Model KA / KAX
Rotary Paddle
> SiloPatrol®
> SFD-2 / SFI
Solids Flow Detector
> SafePoint® Fail-Safe Rotary Paddle > RadarRight Non-Contact Radar > QuantiMass
Solids Flow Measurement
> TrueCap®
RF Capacitance
> SiloTrack Cloud Remote Inventory Management Application
> PZP Vibratory   Bin Aeration
> VibraRod® Vibratory Moisture Measurement > Rect. Air Pads
> Diaphragm Switch > HumiCore In-Line Moisture Measurement > Evasser / Flo-Pad
> Tilt Switch
for Open Piles
  Particle Emission
    > DustAlarm® ES
> DustTrend ES

GRAIN PROCESSING – Flexar® Guided Wave Radar

Economical High Level Sensing in Grain Storage Bins
Continuously Measuring Corn Surge Hopper Level
Flexar® Continuous Level Systems Used for Critical Level Control in Seed...




Bin Level Indicators Selection Chart

Continuous Level Sensors Selection Chart

Mass Flow Measurement Systems
The QuantiMass in-line mass flow sensor measures the flow of quantities in pneumatic conveying & free-falling processes. The sensor is based on the latest Microwave Doppler Effect technology and provides fast, in-line / on-line measuring without the use of weight scales.
The sturdy, non-intrusive design of the sensor minimizes maintenance. In addition, the compact size of the sensor makes for easy installation into existing processes. Suitable for powders, dust, pellets, and granular up to 0.75 inch (2cm).

Ultra Series-Includes controller
PRO Series-Includes transmitter

A practical application for the QuantiMass would be to monitor material flow rates to verify blending mixture ratios.

Principle of Operation:
The QuantiMass Mass Flow Measurement Sensor / Meter is designed with the latest microwave technology and is used to continuously quantify the flow of powders & solids being conveyed in metallic pipes. The QuantiMass is based on technology that has been developed and proven over several years. The measurement process of the sensor is centered on the Doppler effect. The mass flow-rate is determined by evaluating the frequency and amplitude changes during the measurement process. Particles at rest, such as deposits, do not influence the measurement. All powders, dust, pellets and granules can be measured reproducibly, up to the size of 0.75 inch (2cm). The QuantiMass sensor is suitable for continuous in-line / on-line measurements in pneumatic conveying or in free-fall pipelines.

Click here for more information on the QuantiMass
or contact Monitor Technologies LLC at
Tel.: 800-601-6319 in the USA and
Tel.: 630-365-9403 worldwide.
>>Download QuantiMass Ultra Bulletin

>>Download QuantiMass PRO Bulletin

Sign up for our e-news!


Home Solutions Contact Us
Continuous Level Measurement Showcase Rep Locator
Point Bin Level Indicators About Monitor Industry Links
Other Instruments Site Map  

© 2022 • Monitor Technologies, LLCAll Rights Reserved
Privacy / Cookies Policy & Terms

1.800.601.6319 or 1.630.365.9403

View Chinese Version of Site or

Model KA / KAX Rotary Paddle Level Indicator SafePoint Fail-Safe Roatry Paddle Level Sensor RF Capacitance Bin Level Sensors Vibratory Level Sensors Diaphragm Style Bin Level Switch Tilt Switches RadarRight Non Contact Level Sensor SiloPatrol Plumb Bob Level Sensor SiloTrack Cloud Material Inventory Management HMI2 Operator Interface SiloTrack PC Inventory Management Software