SOLUTIONS

REVIEW MY APPLICATION
PLASTIC PROCESSING
FOOD PROCESSING
FEED PROCESSING
GRAIN PROCESSING
AGGREGATES
GENERAL / MISC. / OTHER • • >

 

 


( click here )

 
Silo Terminology

Below are some silo terms that are used in conjuction with Monitor Technologies' continuous level measurement / inventory management systems. (Silo TrackTM Software, HMI, and HMI2 Operator Interface)


Silo Terms

* "Interior Height or Working Height" is the dimension used in the CP06 parameter for the HMI & HMI2 and as the Silo Height entry for the Silo Track software.
Some novice users often mistakenly use the Eave Height for these parameters.


Please feel free to give Monitor Technologies a call (800-601-6319) or e-mail (monitor@monitortech.com) and let us put our creative solutions to work for you!

 

   
     
     
     

 

 
Spotlight: RF Capacitance Level Sensor
TrueCap Level SensorsTrueCap Light  
TrueCap® MK-2
Advanced RF Capacitance Level Probe

The TrueCap® Model MK-2 RF Capacitance point level probe is designed to provide a superior and stable sensitivity threshold making it suitable for a variety of powder / bulk solids and some liquid or slurry applications.

Advanced features of the Model MK-2 include:
> Automatic immunity to material build-up on the probe by its driven shield design
> Push-button calibration
> Enhanced temperature compensation
> Maximized reliability via smart sensing algorithms like “self-validating” fail-safe protection
> Visible status LED on ordinary location units
> Versatility through a variety of configuration options including: hazardous location version, split architecture design, quick-connect process connection, stub probe, cable extensions, solid extensions, Nylon® probes, Ryton® - equiv. probes, etc.

A practical application for the TrueCap would be to use this level sensor where a residual material build-up on a different sensor would cause a false material level indication.

Principle of Operation for the TrueCap RF Capacitance Level Probe:
The vessel wall and the active probe element establish an impedance reference between each other when exposed to air which has a dielectric constant of 1. When materials with a dielectric constant greater than 1 are in close proximity to the probe, the impedance of the sensing field between the sensor and the vessel wall will change. Once the amount of change exceeds a threshold that was electronically determined during the calibration process, an output relay will either be energized or de-energized depending upon the position of the fail-safe selector on the probe’s electronic circuit board. A change of as little as .5 pico-farad is all that is necessary for the probe to sense the presence of material.

Click here for more information on the TrueCap MK-2 Level Sensor or contact Monitor Technologies LLC at
Tel.: 800-766-6486 in the USA and
Tel.: 630-365-9403 worldwide.

 

>>Download TrueCap Product Bulletin #413

>>Click here to learn more about other Point Level Switches from Monitor Technologies


 

Join Monitor's E-Mailing List!
Enter your Email Address Here:


 
 


HOME | PRODUCTS | CONTACT US | REP LOCATOR | INDUSTRY LINKS | SHOWCASE | ABOUT US
SITE MAP


© 2022 • Monitor Technologies, LLCAll Rights Reserved
Privacy / Cookies Policy & Terms
1.800.601.6319 or 1.630.365.9403


 
  Translate This Web Page:
Translate text and documents.