February 2009: Monitor Engineering Dept.

Bill Minnear –
Appointed Electronic Design Engineer for
Monitor Technologies

Elburn, IL --To further Monitor's efforts as a pioneering supplier of measurement instrumentation for the worldwide powder and bulk solids markets, Bill Minnear has been appointed to Electronic Design Engineer. Bill joined Monitor Technologies in August of 2008 as an Associate Electronic Engineer.  Since that time Bill has demonstrated the skills that are critically important to success in product development.  We’re fortunate to have Bill on staff; and the skills, like writing software code, he has gained from many years with a global communications company will greatly benefit Monitor and our customers.

Monitor Technologies LLC is a leading supplier of level, flow, particle emission and aeration instrumentation for the worldwide powder and bulk solids market. The experience and market knowledge gained over five decades has earned Monitor a reputation for providing high quality and reliable product solutions.  Monitor is located in Elburn Illinois, give us a call today and let us put our creative solutions to work for you!
 
For more information refer to www.monitortech.com or contact us at 800-766-6486 in the US or 630-365-9403.

TrueCap^® MK-2
Advanced RF Capacitance Level Probe

The TrueCap® Model MK-2 RF Capacitance point level probe is designed to provide a superior and stable sensitivity threshold making it suitable for a variety of powder / bulk solids and some liquid or slurry applications.

Advanced features of the Model MK-2 include:
> Automatic immunity to material build-up on the probe by its driven shield design
> Push-button calibration
> Enhanced temperature compensation
> Maximized reliability via smart sensing algorithms like “self-validating” fail-safe protection
> Visible status LED on ordinary location units
> Versatility through a variety of configuration options including: hazardous location version, split architecture design, quick-connect process connection, stub probe, cable extensions, solid extensions, Nylon® probes, Ryton® - equiv. probes, etc.

A practical application for the TrueCap would be to use this level sensor where a residual material build-up on a different sensor would cause a false material level indication.

Principle of Operation for the TrueCap RF Capacitance Level Probe:
The vessel wall and the active probe element establish an impedance reference between each other when exposed to air which has a dielectric constant of 1. When materials with a dielectric constant greater than 1 are in close proximity to the probe, the impedance of the sensing field between the sensor and the vessel wall will change. Once the amount of change exceeds a threshold that was electronically determined during the calibration process, an output relay will either be energized or de-energized depending upon the position of the fail-safe selector on the probe’s electronic circuit board. A change of as little as .5 pico-farad is all that is necessary for the probe to sense the presence of material.

Click here for more information on the TrueCap MK-2 Level Sensor or contact Monitor Technologies LLC at
Tel.: 800-766-6486 in the USA and
Tel.: 630-365-9403 worldwide.

>>Download TrueCap Product Bulletin #413

>>Click here to learn more about other Point Level Switches from Monitor Technologies